Under such usage requirements, V-shaped regulating ball valves have emerged as an angle stroke regulating valve. Today, I will list four good reasons for V-shaped regulating ball valves.
1. V-shaped regulating ball valve is an angular stroke type regulating valve that controls fluid by rotating the V-shaped notch spherical valve core tightly against the sealing surface within the small opening area. 2. The V-shaped regulating ball valve has smooth flow channels, large flow coefficient, large adjustable area division, and good sealing reliability. 3. The valve core with a V-shaped notch not only continuously increases the adjustment ratio, but also has a shearing function for the sealing ring during flow interception.
4. The manufacturing industries such as petrochemical equipment, papermaking, wastewater treatment, and metallurgical industry carry out flowability control and sealing of chemical fibers and particles, some pulp, clean water, black liquor, white liquor, and other fluid dynamic media in the papermaking and papermaking process. These works must be approved by applying metal material sealing V-shaped regulating ball valve products to consider adjustment, drilling, and wear resistance performance regulations.
Dear, thank you for your patient reading. If this article is helpful to you, please feel free to like or follow it; If you have any better suggestions or content additions, please leave a message in the comments section below to interact with us for Q&A, or leave your phone number. The purpose of our Baijia brand is to focus on steam traps; Regulating valve; Research and development of control valve technology to ensure more accurate, stable, and reliable fluid operation. I hope to share with you more about the principles, selection, classification, and correct use of various industrial fluid valves.
Originating from online infringement, delete immediately
